Tubular Front Control Arms (Choose Style)

Description

• Constructed using TIG-welded chrome-moly tubing
• Includes:  Ball Joints, Bushings on the Lowers, and Chrome-Moly Rod-Ends on the Uppers.
• Built-in 6 to 7 Degrees of Positive Caster (Complete Kit / Uppers or Lowers alone may not achieve these numbers and could have caster and camber issues)
• Designed to Replace Stock Control Arms
• Reduces Weight by up to 15lbs Per Side (Complete Kit)
• All Upper Control Arms are “PRO Series” – Includes Rod-End Attachment to Billet Cross-Shafts
• Stock Spring Style Lowers Accept Factory Type Spring and Shock Setups
• Stock Spring Lowers Have Dropped Spring Perches, This Is Due to Some Coil-Springs Being Taller Than Stock
• Depending On Your Spring Choice – Stock Spring Lowers MAY Lower The Front-End Between 1.5″ & 1.75″ Compared to Stock
• Coil-Over Style Lowers Will Accept All 1″ Wide x 1/2″ ID Bearing Style LOWER Shock Mounts (for existing QA1 shocks, use COM8T-102PK bearing kit for this)
• 316-Coil-Over Lowers Will Lower The Front-End Roughly 2″ Compared to Stock
• 319 / S10 Coil-Over Lowers Will Lower The Front-End Between 2″ & 3″ Compared to Stock
• Uppers Include Travel Limiters to Control Front-end upward Travel and weight transfer
• Designed for Drag Race Applications Where Spindle Caster Can Range from 0 to 10 Degrees
• Designed for Drag Racing Only – NOT FOR STREET USE (TRZ A-arms do NOT have sway bar tabs as these are NOT for street use)