Long-Travel Strut A-Arm Kits

Description

These are currently designed to fit Menscer Billet, Strange GT, and AFCO Struts using 5/8″ Lower Studs

Available in 4130 or Titanium!

• Single Piece Billet Knuckles
• 40 Degrees of Total Travel in Bearing
• 10 Degree Built-In Camber

Included in Kit:

• 1 ea. Left and Right Knuckles
• (2) COM Bearings
• (2) Spiral-Lock Retaining Rings
• (1) Set of Mis-Alignment Spacers
• (2) Lengths of tubing 2.5′ (Titanium Kits Include Two Tube Cuts 27.5″ Long)
• (2) Clevis Ends with Hardware
• (4) 1/2-20 Tube Adapters
• (4) 1/2″ x 1/2″ 4130 Rod-Ends
• ADDITIONALLY Titanium Kits Include 2 Lengths of TIG wire

Notes: Lower Stepped Washers “May” Need Modification.  Rod-Ends may be omitted by selecting the checkbox or Upgrade to Billet Chassis Mount Kit 

Available – Tapered Stud Adapters to Fit TRZ Billet Mustang Spindles – Designed for SN95 style ball joint taper dimensions.

• When Using This Set-Up With Long Travel Fox Body Style Struts (Longer Than Normal Bolt-In Struts) Billet Chass Mounts May Limit Travel at The Rod-Ends

Available – Titanium Lower Strut Studs for Menscer Billet, Strange GT  and AFCO Struts using 5/8″ Lower Studs

Weights:

• 4130 Kit w/Rod Ends = 7lbs 4.1oz
• 4130 Kit w/o Rod Ends = 6lbs 2.4oz
• Titanium Kit w/Rod Ends = 4lbs 5.1oz
• Titanium Kit w/o Rod Ends = 3lbs 3.3oz
• Mustang Tapered Stud Adapters + Hardware (For Both) = 14.9oz
• Titanium Lower Strut Studs (For Both) = 6.9oz