Description
Pictured are several housings modified in a wide variety of ways to suit customer’s needs.
These services are performed in-house to YOUR existing rear end housing.
Available primarily for: Ford 8.8, Ford 9″, Dana 60 and GM 10/12 Bolt.
We do NOT at this time do leafspring housings / installation of leafspring perches.
Please call about your specific housing needs!
We have broken down these needs into several different options:
209-03 ($350-$400) – Install TRZ 209-31 Lower Control Arm Mounts – Includes Mounts and Removal of Existing Brackets
209-05 ($350) – Install 9″ Ford style housing ends / Includes NEW ends of your choice / Narrowing at no additional charge
209-11 ($75) – Install Lower Control Arm Brace Tube / This goes between the lower mounts and will usually weld to the center section area of housing
209-12 ($100) – Install Bottom Bracing / These are diagonal supports between the axle tubes and the Lower Brace (Lower brace tube required)
209-25 ($200) – Install TRZ Coil-over Mounts / 209-27 or 209-28 Coil-over Mounts included
209-07 ($150) – TRZ Spherical Housing Bearings Installed on Housing
TRZ88RACE ($300) includes: (Available on Foxbody 8.8 Only)
- Full Race Bracing
- Pinion Support Plate
- Lower Cross Brace Between Lower Control Arm Mounts
- Weld Axle Tubes to Center
TRZ88REB ($150) includes: (Available on Foxbody 8.8 Only)
- Rod-End Style Axle Tube Bracing Installed
**Customer MUST supply a fairly straight housing that is clear of dirt, debris, and gear oil. Extra charges will apply to housings that need to be straightened or cleaned.**