79-93 Mustang Strut Adjuster / Camber Plate Kit

Description

What to Know

Allows for 3/4” of Ride Height Adjustment (Up or Down from Neutral) While Maintaining 100% Thread Engagement

Mounting Plates are made from 17-4 Stainless and can be Welded in Poistion if Desired

Aluminum Inner Threaded Adjusters Are Made of 7075 Aluminum & Are Hard Anodized for Corrosion Resistance

The Upper Strut Mount Bearing in these Caster Camber Plates is positioned lower than most.  This allows for Ride Height adjustment at the Strut Mount rather than with the springs alone.  This will usually mean that a car that currently has Stock / Stock Height Spindles, will now need 2″ Drop Spindles.  Also, cars currently running 2″ Drop Spindles MAY need 4″ Drop Spindles.

The adjuster is 2-1/4″ in Diameter and MUST be able to travel thorugh the hole in the factory strut tower without dragging.  The strut shaft must be positioned nearly in the center of the factory strut tower hole within the Camber Plane. 

These are ONLY meant to be used with one of the situations below, to keep the Strut Shaft Alignment correct:

• Stock Length Foxbody A-Arms (13″) AND Direct Replacement Drop Spindles (TRZ 2″ or 3″, Racecraft, etc…)
• 1″-1.5″ Narrowed A-Arms (11.5″=12″) AND TRZ Billet Aluminum 4″ Drop Spindles (Camber Corrected) or Racecraft LONG ARM 2″ Drop Spindles (Camber Corrected).
• Spindle Struts and Custom A-Arms – Can work with 10* (Strange / AFCO) and 15* (Santhuff) with custom made a-arms (TRZ Long-Travel Strut A-Arm Kits)

Bolt-In Strut Fitment

Fits AFCO / Menscer Fox Body Struts Using their Included Upper Bearing Spacers

Can fit any other existing strut by carrying over upper bearing spacers

Spindle Struts (Will Require Custom A-Arms)

Strange GT Struts Uses 5/8”

Afco / Menscer Spindle Struts Terminator Uses 11/16”

Includes

(2) 17-4 SS Strut Mounting Plates

(2) Large Diameter Strut Adjuster Bearing Cups

(2) Aluminum Jam Nuts

(1) ½” Drive Socket Wrench Adjustment Tool

(2) COM12T PTFE Lined Spherical Bearings

(2) Spiral Locks

(2) Lower Stud Plates with Hardware